Browse articles by category
[KB1216] Sofrel OPC UA Server Validation Results
Applies to: PcVue 16.1 and later Summary: This article contains the results from validation tests of the Sofrel OPC UA Server v2.20.27 and PcVue. Originator: ELCH Details: This guide contains […]
[KB1073] LoRaWAN Multitech Gateway
Applies to: PcVue version 12 (LoRaWAN reading) PcVue version 15 onwards (LoRaWAN writing) Summary: This article give all the information and files needed to connect to the Multitech(MultiConnect Conduit) […]
[KB1070] LoRaWAN Kerlink Gateway
Applies to: PcVue version 12 onwards. Summary: This article give all the information and files needed to connect to the Kerlink (Wirnet iStation) LoRaWAN gateway. Please refer to the .pdf […]
[KB1013] LoRaWAN driver
Applies to: PcVue version 12 onwards. Summary: This article give all the information and files needed to connect to the Multitech LoRaWAN gateway. Please refer to the .pdf documentation attached for […]
[KB874] LEGACY DATA ACQUISITION DRIVERS
Summary: The following protocols were inherited from earlier versions of the Supervisor. Many have been validated for use with this version and are in regular use. However, before using one […]
[KB850] Sofrel OPC Server Validation Results
Applies to: PcVue 9.0 and later Summary: This article containes the results from validation tests of the Sofrel Server and PcVue.Originator: ACH Details: The attached document contains both the results […]
[KB848] BACnet System Variables
Applies to: PcVue 11.2 only Summary: The method used for BACnet connectivity was changed for 11.2. The 11.2 help still contains status variable information for the previous connectivity method. The […]
[KB805] BDS Admin Error Message
Applies to: PcVue 11.1 and earlier Summary: BDS Admin Error Message Details: If you use the Startup Type Automatic for the BACnet DataServer service you may, under some conditions, see […]
[KB768] Multi station configuration for native driver
Applies to: Any PcVue version Summary: How to launch the native driver only on the server machines and not the clients. Details: For native driver there is no way to […]
[KB733] Double mapping on a CIMWAY frame
Applies to: PcVue 10.0 SP1, 11.0 onwards Summary: Double mapping on a CIMWAY frame.Originator: EM Details: It is now possible to map two variables to the same item […]
[KB724] SAIA Solution not to install the full PG5 suite
Applies to: Any PcVue version Summary: Making the SAIA driver works without installing PG5 suite Details: In order for the driver SAIA to work it is mentionned in the help […]
[KB637] DNP3 Sample Project
Applies to: PcVue version 11.0.In general if a project is used with a later version of PcVue it will be automatically converted to that version. Occasionally it may be necessary […]
[KB612] Timestamped ModbusIP project
Applies to: PcVue version 10.0 SP2.In general if a project is used with a later version of PcVue it will be automatically converted to that version. Occasionally it may be […]
[KB602] BACNet Configuration in PcVue
Applies to: PcVue version 10.0 SP1 to version 11.1.The BACnet implementation from PcVue version 11.2 onwards uses different technology to which this article is not applicable. Summary: The way in […]
[KB598] BDSAdmin and DEMO MODE
Applies to: From PcVue version 9.0 to 11.1The BACnet implementation from PcVue version 11.2 onwards uses different technology to which this article is not applicable. Summary: Why is the BdsAdmin […]
[KB505] How to share a physical com port on the same computer
Applies to: PcVue all versions Summary: This article describes how duplicate a physical Com port, or share a virtual Com port, on the same computer. For example to make a […]