Back

Topic

[KB559]S7 ISO Error codes

Tags: Cimway, S7, S7 ISO

Data acquisition
13 years ago
By RM
Options
Print
Applies to:

PcVue vesion 10.0 only
Summary:

The error codes, in the help for version 10.0 of PcVue, for the IP ISO S7 protocol are out of date. The following codes should be used instead. (Note that the correct error codes are included in the help of later versions.)
Details:

 

Code Meaning Action

0x0007

DEVICE_NOT_OPEN*

Check that the AGLINK40.DLL is version 4.4.2. If not simply take the AGLINK40.DLL from the most resent version and copy it into the BIN folder.

This DLL is not dependant on the PcVue version

0x5000

NO_QUEUE

  

0x5001

INVALID_PACKET

  

0x5002

NOT_CONNECTED*

Check that you can ‘Ping’ the PLC

0x5003

CONNECTION_CLOSED

  

0x5004

TIMEOUT

  

0x5005

WRONG_CONTEXT

  

0x5006

PLC_MEMORY_ERROR

  

0x5007

WRONG_OP_STATE

  

0x5008

WRONG_ADDRESS*

Frame configuration format. The DB might not exist or is smaller than the configured frame.

0x5009

INVALID_MODE_ERROR

  

0x500A

NO_DATA_ERROR

  

0x500B

PLC_PRIORITY_CLASS_ERROR

  

0x500C

EMPTY_BLOCK_LIST

  

0x500D

PLC_BLOCKSIZE_ERROR

  

0x500E

INVALID_BLOCK_NUMBER

  

0x500F

PROTECT_ERROR

  

0x5010

UNKNOWN_SZL_ID

  

0x5011

UNKNOWN_SZL_INDEX

  

0x5012

NO_INFORMATION

  

0x5013

UNKNOWN_PLC_ERROR

  

0x5014

HARDWARE_ERROR

  

0x5015

OBJECT_ACCESS_NOT_ALLOWED

  

0x5016

CONTEXT_NOT_SUPPORTED

  

0x5017

TYPE_NOT_SUPPORTED

  

0x5018

PDU_ERROR

  

0x5019

NO_PLC_START

  

0x501A

NO_PLC_RESUME

  

0x501B

DISCONNECT_REQUEST

  

0x501C

PLC_NOT_FOUND

  

 
*Most commonly seen errors.

Created on: 24 Apr 2012 Last update: 13 May 2024