Alarms
Audit and diagnostic
Communication interfaces
Configuration environment
Data acquisition
DataVue/Data Export
Development kits
General
Historical data
HMI
Other Products
PcVue installation
PcVue miscellaneous
Real time data
Sample projects
Scripting
Security bulletin
SnapVue
System
TouchVue
UDC
Upgrade issues
Useful tools
Version Information
FrontVue 15
FrontVue 16
PcVue 10.0
PcVue 11
PcVue 11.1
PcVue 11.2
PcVue 12
PcVue 15
PcVue 16
PcVue 6
PcVue 7.00
PcVue 7.20
PcVue 8.00
PcVue 8.10
PcVue 8.2
PcVue 9.0
PlantVue 2.6
WebVue
[KB1028] CwAudit and Timestamped frames
Applies to: PcVue all versions before 16 Summary: Use the CwAudit utility to trace time-stamped frames. The CwAudit utility is a tool for activating traces related to data acquisition via […]
[KB804] How to configure Fetch/Write communication for the S7-1500
Applies to: All version of PcVue supporting the Siemens Master driver. Summary: How to configure Fetch/Write communication via a CP1543-1 for the S7-1500. Originator: BO Details: This article shows you […]
[KB768] Multi station configuration for native driver
Applies to: Any PcVue version Summary: How to launch the native driver only on the server machines and not the clients. Details: For native driver there is no way to […]
[KB783] Modbus functions used according to frame data type
Applies to: Any versions Summary: This article gives the correspondance between the Modbus Ip function used and the PcVue Frame data type Details: Please find the correspondance table between the […]
[KB787] Counting Write Commands in Your Application
Applies to: PcVue all versions. Summary: This article explains how to activate a log in the Event Viewer of the Supervisor to check the number of Write commands that are […]
[KB733] Double mapping on a CIMWAY frame
Applies to: PcVue 10.0 SP1, 11.0 onwards Summary: Double mapping on a CIMWAY frame.Originator: EM Details: It is now possible to map two variables to the same item […]
[KB724] SAIA Solution not to install the full PG5 suite
Applies to: Any PcVue version Summary: Making the SAIA driver works without installing PG5 suite Details: In order for the driver SAIA to work it is mentionned in the help […]
[KB637] DNP3 Sample Project
Applies to: PcVue version 11.0.In general if a project is used with a later version of PcVue it will be automatically converted to that version. Occasionally it may be necessary […]
[KB628] Communication with a Siemens S7-1200/1500
Applies to: PcVue version 10.0.The basic content of this article may also be applicable to other versions of PcVue although the detail may vary. Summary: How to communicate with a […]
[KB625] How to optimize/increase communication speed with a PLC
Applies to: PcVue all versions. Summary: How to improve communication when the status is e000. Details: A communication status of e000 means that frames are being scanned at a slower […]
[KB622] Using a Digi portserver with PcVue
Applies to: PcVue version 10.0.The basic content of this article may also be applicable to other versions of PcVue although the detail may vary. Summary: This article describes the problem […]
[KB612] Timestamped ModbusIP project
Applies to: PcVue version 10.0 SP2.In general if a project is used with a later version of PcVue it will be automatically converted to that version. Occasionally it may be […]
[KB583] Virtual Equipment plus CIMWAY mode CFG project
Applies to: PcVue version 8.0.In general if a project is used with a later version of PcVue it will be automatically converted to that version. Occasionally it may be necessary […]
[KB559] S7 ISO Error codes
Applies to: PcVue vesion 10.0 only Summary: The error codes, in the help for version 10.0 of PcVue, for the IP ISO S7 protocol are out of date. The following […]
[KB536] Modbus Plus Protocol
Applies to: PcVue version 10.0 (Build 2476) Summary: This article explains how to use Modbus Plus protocol with PcVue 10.0. Details: The Modbus Plus driver is not supplied with PcVue […]
[KB450] PcVue 10.0 – Protocols no longer supported
Applies to: PcVue version 10.0 onwards. Summary: List of data acquisition drivers no longer supported in PcVue version 10.0 and later. Details: Starting with PcVue version 10.0, the following data […]
[KB443] How to connect to Siemens PLC simulator – PLCSim
Applies to: PcVue all versions. This article contains obsolete references. Summary: Link to a tool that allow PcVue to communicate with Siemens PLC simulation tools PLCSim Details: If you want […]
[KB300] Queue regulation
Applies to: PcVue version 9.0.The basic content of this article may also be applicable to later versions of PcVue although the detail may vary. Summary: This article describes how […]
[KB292] Modbus IP and Network Behaviour
Applies to: PcVue all versions. Summary: Using Modbus IP, in network architecture, its possible for the client station to unexpectedly communicate directly with equipment. How? A variable is incorrectly configured […]
[KB286] How to reverse a bit coming from PLC
Applies to: PcVue all versions. Summary: Some PLC programs use some bits in “Inverse logic”. We need to invert them for PcVue. Details: PcVue can do it automatically – but […]
[KB256] Cimway problem each hour due to Windows power management
Applies to: PcVue all versions. Summary: Disconnection of Cimway communication occurs every hour. Solution: New PCs are often provided with OS default settings for energy saving. These have to be […]
[KB102] Communications limits in versions before 7.00f
Applies to: PcVue version 7.00d and earlier. Summary: This article specifies limits of connectivity for communications in previous versions of PcVue. Details: If too many frames are generated in PcVue, […]
[KB64] Using SAIA SBUS protocol with PcVue
Applies to: PcVue all versions supporting Windows 95 and the SAIA protocol.This article contains obsolete references. Summary: This articles provides additional information about SAIA SBUS protocol for PcVue under Windows […]
[KB63] Communicating with a TWIDO device via Modbus TCP/IP
Applies to: PcVue all versions. Summary: This article gives some tips for communicating with a TWIDO programmable controller from Schneider Electric via the Modbus TCP/IP protocol. The tips are as […]
[KB64] Open Modbus TCP/IP Master Protocol – Benchmarks
Applies to: PcVue versions 7.20d SP1, 8.00 SP5, 8.10 and later.This article contains obsolete references. Summary: This article presents some test results from a project communicating via Modbus IP master […]
[KB61] Wordbit with Modbus IP Master on Schneider TSX57
Applies to: PcVue all versions. Summary: This article describes how to read Wordbit frames with Modbus IP Master on Schneider TSX57. Details: To read Wordbit frames properly from a Schneider […]
[KB60] How to configure the Ethernet coupler of S7-300/S7-400 PLC for PcVue Industrial Ethernet protocol
Applies to: PcVue version 7.10c onwards. Summary: This article explains how to configure an Ethernet PLC Coupler using Step7 software from Siemens Automation. Details:For PcVue to communicate with S7-300/400 Ethernet […]
[KB58] Using Double Words with Applicom
Applies to: PcVue all versions. Summary: This article recommends a configuration for use with double word frames with Applicom. Details: There are two possible formats for coding 32 bit words: […]
[KB57] Updating the Protection Key number of an Applicom ISA card
Applies to: PcVue all versions. Applicom cards in ISA format. This article contains obsolete references. Summary: This article describes how to update the protection key number of an Applicom ISA […]
[KB56] Problem with Applicom protocol with Batibus
Applies to: PcVue versions 6.04j and 6.05d, Applicom protocol driver version 5.51.This article contains obsolete references. Summary: This article explains how to solve problems with using Applicom protocol with Batibus. […]
[KB55] Open Modbus slave protocol with Applicom
Applies to: PcVue version 6.10 onwards.This article contains obsolete references. Summary: This article explains how to configure an Open Modbus slave protocol with PcVue when Applicom is the Open Modbus […]
[KB54] How to launch PcVue automatically from Applicom
Applies to: PcVue all versions.This article contains obsolete references. Summary: This article explains how to launch automatically PcVue from Applicom when starting Windows NT. Details: When executing the command PCINIT, […]
[KB51] Simultaneous communication of 2 Applicom cards on a PC to 1 PLC on Profibus
Applies to: PcVue all versions.This article contains obsolete references. Summary: This article describes how to set up simultaneous communication with Applicom and Profibus. Details: Certain configuration rules must be observed […]
[KB49] Migration of communication from 7.00d to 7.00f
Applies to: PcVue version 7.00f onwards (when migrating from 7.00d or earlier). Summary: This article describes some problems you can encounter when migrating a Modbus TCP/IP application from a 7.00d […]
[KB48] Maximum number of pending Write requests
Applies to: PcVue version 7.20d onwards.While the basic content of this article remains valid, details may have changed since it was written. Summary: This article explains how to configure an […]
[KB7] How to add a protocol to your project
Applies to: PcVue all versions. Summary: This article explains how to declare a communication protocol so that a project can use it. Details: You can define a communication protocol in […]
[KB5] How to diagnose a bottleneck of Write requests
Applies to: PcVue from version 7.20a. Summary: This article explains how to diagnose a bottleneck of Write requests from the EQT Manager to CimWay. Details: The properties that control the […]